Wednesday, June 30, 2010

I was on the radio this morning for Vision California



The link to the radio program is here:


I think my section starts at about 16:40.... Dan Leavitt (Deputy Director of the California High Speed Rail Authority) and I were interviewed by host Jeffrey Callison about the recent Vision California data release, which has generated some press coverage already. We discuss some fun facts from the data release, as well as why the project is happening, why High Speed Rail is funding it and how confident we are in the results.

Wednesday, June 16, 2010

Rebuilding the Streets of North Oakland



So, I was invited to write an op-ed piece for the Oakland North blog, discussing pedestrian and bicycle safety in North Oakland following the wave of incidents in recent weeks.

This is my submission:

http://oaklandnorth.net/2010/06/16/you-tell-us-rebuild-oaklands-streets-to-make-them-safer/

Please share it widely among folks who might be interested; feel free to forward it to lists and groupservs that might hit folks who live in North Oakland (or elsewhere) and care about this issues. I would like to continue to use the Oakland North site as a forum to begin a community dialogue about these issues, and see what might be made to happen as a result.

If you don't live in north Oakland and are reading this post, please tell me what you think right here on Underground Science!

thanks,
~Garlynn

Monday, May 03, 2010

My Ideal Cell Phone: Specs





OK, so a number of years back (in 2006), I put out specs for my ideal automobile, updated the post later in the year with a progress report... then gave up on the idea of anything happening soon, and settled for buying a 20-year-old diesel Mercedes wagon to run on biodiesel. Since then, Mercedes has announced plans for a new diesel-electric hybrid car at some point in the future, as has Volvo and others... and I followed up with specifications for the ideal plug-in biodiesel hybrid wagon... but I since announced that there are lots of poor options when it comes to new cars, and lots of great options when it comes to new bicycles...including the bakfiets, the station wagon of bicycles. You pretty much have to go to Europe to get a decent car right now with good gas mileage that is biodiesel-capable.


So, enough about transportation. I've tried to make a difference, and maybe I have, but these things take time.


Right now, I'd like to turn my attention to the cell phone. There have been a lot of advances in cell phone technology recently, and indeed, there seem to be a lot of decent phones on the market right now.


But.... BUT... my personal cell phone is now at least five years old. Verizon has been offering to give me a free new phone of my choice for at least the past three years, and I keep turning them down.


Why?


It's not that all new phones stink... it's just that none of them actually meet all of my specifications, and I keep hoping that the right phone will be released in the next two years, so I might as well wait for it. Besides, my current phone (an old Audiovox) works just fine, with decent battery life, good call quality and reception, and the ability to take photos and video, send and receive text, picture and video messages, and even do some rudimentary web surfing and gaming (i.e., tetris and chess).


So, without further ado... what would it take to get me to upgrade? Here's the list:
  • It needs to work on the Verizon network, native, with full support. I hate AT&T, having done business with them a number of times in the past and had to endure their monopolistic thinking and shoddy customer service. I won't do it again. I've been with Verizon since they used to be called AirTouch, and aside from their politics, I see no reason to leave (though, Working Assets/Credo Mobile might start looking more attractive if Verizon keeps supporting the Blue Dog Democrats)...
  • It needs to offer at least 120 gigabytes of on-board storage capacity, and preferably closer to 200 gigs -- or more. I'd like to just take all of my music and a lot of my movies, plus some of my photos, with me when I'm mobile. Why should I have to limit myself to a certain sub-set of my collection? The technology now exists and is quite cheap to just give it all to me when I'm on the go.
  • It should have a 4+ megapixel digital camera built it, with an actual physical zoom lens (3x minimum), a decent flash, and decent night-time photography capabilities (this is apparently mainly a software thing now). I'd love to have a physical viewfinder, but... I could live without it if one feature had to get cut. It should, in short, be a good digital camera... not the best, but it should certainly be competitive with the best compact digital cameras circa, say, 2004 or 2005...
  • It needs to plug in to a standard USB port for synching, but it should act as a standard external drive when plugged in, with no funny business with regards to copy protection, digital rights management, or any of that bullshit. Let me use it how I want to use it, that's why I'm paying money for it -- keep your corporate paws out of my private business.
  • It should be an excellent music player, with the ability to support noise-cancelling headphones, either corded or via bluetooth, and excellent sound reproduction, including transfer of frequencies from 10hz to 200khz, that is, just outside both edges of human hearing -- just in case I decide to plug it into something other than headphones that may have the ability to actually reproduce those frequencies.
  • It should be an excellent cell phone, with perfect call quality when service is good, the ability to operate either in digital or analog mode, the ability to switch modes on the fly without dropping a call in order to achieve top call quality, and the ability to operate on any network in the world that uses any technology currently in use by cell phones.
  • It should have decent battery life, that is, the ability to talk for a few hours, or listen to music for a few hours, and then be in standby for a few days, on a single charge. I don't have unrealistic expectations for this, and I'm certainly fine if I need to plug it in when I go to sleep every second, third or fourth night depending on how much I use it -- but at least out of the box, I shouldn't have to plug it in every night, and I certainly shouldn't need to plug it in more than once a day (unless I'm using it for like eight hours straight for battery-intensive operations).
  • It should be good at surfing the web, at least as good as the iPhone is currently, and be able to view some version of all standard web pages, not just the "mobile version."
  • I think it probably should also support Flash. It should be MY decision, not the decision of Steve Jobs, if I want to take the risk of running Flash. Maybe I should have to sign a disclaimer saying that I know I'm an idiot if I want to do this, but then, I should still be able to do it. Please, just let me be my own idiot when it comes to installing and running programs on my device that, technically, should be able to run on that device just fine.
  • It should be able to run a variety of other applications, within reason (i.e. I don't expect to be able to run a full-fledge GIS on it, but a slim version of Google Earth might be nice).
  • It should have the standard accelerometer, gyroscope, compass, GPS, and other functions that any modern iPhone or competitor now has, and the ability to use them.
  • It should be tough. Like Dvorak has suggested, "make the thing out of tungsten. Drop it, and it would break the floor. Tungsten has a great finish. People will ask, "wow, it's actually made from tungsten?"" Or, you know, find some other way to make it really tough, and hard to break... I don't care if it's tungsten, titanium, aluminum, or just stainless steel. I've dropped my current phone dozens of times, on a variety of surfaces. It's a flip-phone... that's one of the reasons I like the flip-phone design. The thing just takes it and keeps working, and it's made out of plastic. Give me a reason to pay $50 more for something that will last a long time (like a MacBook Pro laptop or a Mercedes), and I will.
  • Maybe it should have night-vision camera capabilities. That would be cool... or even just the ability to hold it up and see the night-vision view on the screen. OK, that's maybe just a cool idea for an app, I don't quite understand all the technology involved. That's not a requirement.
  • It should definitely have the ability to run a powerpoint show (via some dongle that, say, plugs into its USB or monitor out port and into a standard VGA cable) or even show movies via a projector or TV. After all, it will be able to hold dozens of movies on its massive HD, why not allow you to watch them on a full-size screen?
  • It should have an average-size screen. The screen on the iPhone is fine. In fact, the dimensions of the iPhone are about perfect. It could even be a little bit thicker, to accommodate more battery and more storage device (hard drive, flash drive, whatever works best). Not TOO much thicker, but a few more millimeters wouldn't be a deal-killer.
  • It should be tough. Did I say that already? If it gets dropped, I don't want anything breaking, including the screen. MAKE IT TOUGH. I'll pay extra. I need to make that clear. Also, just build it to last -- don't skimp on the components, go for the high-quality stuff. But, within reason. I'd pay $400 for such a device, maybe even $500 with a good warranty... but not much more... so, be really smart about the design and manufacturing...
OK, that's a pretty long list, so I'll quit while I'm ahead. I think you get the picture. Comments are open and welcome.

cheers,
~Garlynn

Monday, April 19, 2010

An Update from the Front Lines in the War on the Car


While you might think that it would be yours truly giving you an update in the War on the Car, I'm merely using this post to pass on a link to what could be seen as a rather humorous piece postulating an actual war between cars and people... except that it's not really imaginary, it's reality, and what the piece describes, is truth:

The war on The Car: An update

Still, a good read, and interesting to think of the currently-underway paradigm shift in terms of a military campaign...

Wednesday, March 03, 2010

Senator Jim Bunning: American Hero


I'd like to take this time to commend Senator Jim Bunning, an American Hero.

In this time of partisan strife, he has set fake morality arguments, theocracy, and corruption aside. His filibuster of a bill that would, among other things, extend unemployment benefits by adding to the federal deficit, is a pure example of the opposition party using the filibuster for its intended party: As a last-ditch means to prevent the majority party from doing something which may be of questionable reasoning, and force negotiations to come up with a more sensible solution.

Jim Bunning may be facing a tough re-election challenge, but that doesn't stop him from taking a potentially unpopular position with members of his own party (at least those in party leadership -- I wouldn't be surprised if the more fiscally-conservative members of his base weren't actually totally behind him, especially those who have jobs or are retired...).

If more members of his party would use their opposition status to lob correctly-reasoned attacks on efforts to violate the pay-go ethic that should rule during times of large budgetary deficits, and spend less of their time and effort making nonsensical arguments that only prove the depth of their corruption and beholdenness to moneyed interests (health insurance companies, the AMA, the military-industrial complex, the oil companies, etc.), this country would be in a LOT better place right now.

I again commend Senator Bunning for his patriotism and correct use of the filibuster as a parliamentary procedure. We should all tip our hats to his brave act of budgetary-hawk courage exhibitionism.

cheers,
~Garlynn

Friday, February 12, 2010

Portland Mayor: Bicycling -- that's how we roll.


I just came across this heartwarming article in which Mayor Adams makes a strong commitment to building out the citywide bicycle network in Portland, OR, at a cost of over $600 million.

“There’s been some chatter out there about cost, and that’s fine,” Adams said. “We’re Portland and we lead the nation in bicycling, because that’s how we roll.”

What a great quote, and what a great stand to take. If only we had more leadership willing to take a strong stance like this for bicycles, we could really make some progress on many, many issues -- climate change, obesity and traffic injuries, just to name a few...

Wednesday, January 20, 2010

The Filibuster: An Open Letter to Vice President Joe Biden





Dear Vice President Biden,

I'm writing to you because the time for the mis-use of the filibuster tool in the United States Senates has to come to an end. This un-constitutional blockage is now turning into a defining element of policy-making in our nation -- and it can be stopped by you.

Article I, Section 3 of the United States Constitution expressly says that the vice president as the presiding officer of the Senate should cast the deciding vote when senators are “equally divided.” The procedural filibuster currently in use in the U.S. Senate does an end run around this constitutional requirement, which presumed that on the truly contested bills there would be ties.

With supermajority voting, the Senate is never “equally divided” on the big, contested issues of our day, so that it is a rogue senator, and not the vice president, who casts the deciding vote. The procedural filibuster effectively disenfranchises the vice president, eliminating as it does one of the office’s only two constitutional functions. Yet the founders very consciously intended for the vice president, as part of the checks and balances system, to play this tie-breaking role — that is why Federalist No. 68 so specifically argued against a sitting member of the Senate being the presiding officer in place of the vice president. But the bigger reason for the rule was to keep a minority from walking out and thereby blocking a majority vote.

In Federalist No. 75, Hamilton dismissed a supermajority rule for a quorum thus: “All provisions which require more than a majority of any body to its resolutions have a direct tendency to embarrass the operations of the government and an indirect one to subject the sense of the majority to that of the minority.” It would be illogical for the Constitution to preclude a supermajority rule with respect to a quorum while allowing it on an ad hoc and more convenient basis any time a minority wanted to block a vote. Yet that is essentially what Senate Rule 22 achieves on any bill that used to require a majority vote.

To stop the current unconstitutional abuse of the filibuster tool, the best currently-available option would be for the president of the Senate, the vice president himself -- that's you, buddy -- to issue an opinion from the chair that the filibuster is unconstitutional. Our first vice presidents, John Adams and Thomas Jefferson, felt a serious obligation to resolve the ties and tangles of an evenly divided Senate, and they would not have shrunk from such a challenge.

The founding fathers of our nation would have expected us to do something about this unconstitutional filibuster. In Federalist No. 75, Hamilton denounced the use of supermajority rule in these prophetic words: “The history of every political establishment in which this principle has prevailed is a history of impotence, perplexity and disorder.” That is a suitable epitaph for what has happened to the Senate.

Joe Biden, your moment has come. Do not shrink from your mission. It is up to you to stop the unconstitutional abuse of the filibuster tool and to fix the republic. This will be a bold step; do not be afraid to take it.

If your administration wants any hope of accomplishing the rest of its bold agenda, this is the first bold move that will be required, and we, the people, demand that you take it.

Sincerely yours,

Garlynn G. Woodsong

(With thanks to this op-ed piece in the Ny Times.)

Sunday, October 04, 2009

Go see Capitalism: A Love Story




Hi everybody,

It's me, Garlynn.

I'm just writing with a movie recommendation that I think you should all see.

And I'm a bit conflicted about this, because, well, this movie, called "Capitalism: A Love Story", by Michael Moore, is a pro-American screed against the capitalist system that is holding us all down. So, it doesn't make much sense to go out and line some corporate pocket in order to see it. If you can figure out a way to sneak into the theater for free, well, I highly encourage it. Otherwise, well, do what you have to do.

Personally, out of all the people whose pockets I could potentially line, however, Michael Moore ranks pretty low among those who it would piss me off to do so. This is, apparently, his best movie yet, which sets a pretty high bar -- and if lining his pocket now rather than later is the real choice, I'd rather do that now if that's what it takes to send a proper f*ck-you to Wall Street. (It's just the corporate middle-men who run AMC and United and the other corporate soul-sucking theatre chains that I'm less happy about, but then again, well, at least they've agreed to show his movie.)

Here's what the San Francisco Chronicle has to say about the movie. And below that, is what Michael Moore wrote that convinced me to go see it tonight -- I just got back from the theater, and let me tell you, it's worth it. It's a rousing movie, and I hope it inspires us all.

cheers,
~Garlynn



***

San Francisco Chronicle:

"Documentary, 127 minutes, Rated R


Love him or hate him, Michael Moore's latest, most impassioned diatribe has a flat-out polemic wizardry that'll frizz your hair and break your heart: promoting a radical democratization of economy, he touches on everything from the low pay of airline pilots to the 2008 financial meltdown. Simplistic, smart-alecky, primo Moore. -- A. Biancolli, SF Chronicle"




Michael Moore:

---------- Forwarded message ----------
From: Michael Moore
Date: Sat, Oct 3, 2009 at 2:17 PM
Subject: A Great Opening Night -- Do Not Put Off Seeing "Capitalism: A Love Story" -- GO TONIGHT! All of Wall Street is Watching!
To: garlynn

A Great Opening Night -- Do Not Put Off Seeing "Capitalism: A Love Story" -- GO TONIGHT! All of Wall Street is Watching!
Saturday, October 3rd, 2009

Friends,

Thank you, all of you, who packed the theaters across North America last night to see my new film. The movie houses were rockin'! The national movie exit poll company announced this morning that the audiences in America gave "Capitalism: A Love Story" a rare "A" rating! Wow, thank you! In most multiplexes where "Capitalism" played, it was the #1 or #2 top-grossing movie there for the evening. That is nothing short of amazing.

For those of you waiting till next week to see it, I can't say this strongly enough: Do not put off going to see "Capitalism: A Love Story." It is not just a movie. It is a referendum that is being closely watched by the CEOs of America. Let me tell you bluntly, the suits on Wall Street are closely watching to see how this movie does this weekend. So, too, are the members of Congress. If "Capitalism" has a huge opening, it will send shivers down their corporate spines, telling them loud and clear that the American people are mad as hell and are not into taking it any more. It will put all the bosses on notice that the vast Obama-voting majority has awoken from its silence and are out in full force.

But if the attendance is just "ok" or "so-so," then they will be relieved knowing that there is not a popular groundswell of opposition out there -- and then they can go about their business as usual. I'd like to send them a different message.

Treat tonight and tomorrow as if it were election day. Blow their minds on Monday morning when they show up at their executive suites, switch on CNBC or Fox Business News, and learn that America turned out in droves to participate in a raucous denunciation of Wall Street and everything it stands for. I often hear people ask, "What can I do to make my voice heard?" Your answer is at the nearest theater showing this movie. Trust me, packing these movie houses tonight and tomorrow will eff them up in an overwhelming and profound way.

Last night, there were many reports of spontaneous cheering throughout the film in nearly all the theaters. Theater managers reported difficulties in getting people to clear the theater lobby afterwards because groups of total strangers assembled to passionately discuss what they just saw. One manager wrote to me and said, "It's a good thing we carry Gummy Bears and Junior Mints at the concessions stand instead of pitchforks and torches! These crowds were ready to march over to the local Citibank and do something!" Another manager said a crowd in the lobby formed around the little Chase ATM machine next to his popcorn stand and started to "yell at it." Jeez! (Click here to see some of the cell phone photos fans have sent from various theaters around the country last night.)

Here's what I've heard the most about last night: Audiences were stunned and shocked by many of the things I reveal in the movie -- stuff that the networks have refused to show them -- even though they have the footage! They purposely withhold this news from you, the public. And because I dare to show it, some networks now refuse to license any of their footage to me. So I get my hands on it and put it in the movie anyway. I truly don't care. I'm sick and tired of the truth not being told to the American people -- and I am willing to suffer whatever the consequences come my way because I showed it to you. Fortunately we have "fair use" laws in this country that have kept my hide out of court so far. There is something so patently wrong with not being told what Wall Street and Corporate America are up to. If you go see "Capitalism" tonight, you'll see what I mean. You will alternately have your head spinning and then find yourself laughing your ass off!

Much more is riding on the success of this movie than the amount of popcorn that is sold. If we do well this weekend, the studio will expand the film to smaller towns next week. Don't put off seeing it! Click here to find out where it's playing and order your tickets now. Call some friends and make a night of it. My crew and I have put nearly two years of our lives into this and I am honored that it has been so well received. Join in on the fun of giving AIG, GM, Bank of America and all the other thieves the shellacking they deserve. And send me a photo of you and the crowd there tonight! I'll post it and personally send it to the heads of all the financial institutions and the members of Congress. They need to get a clue -- right now -- and I'd like you to help me send them that clue!

Thanks again, and I'll see you tonight at the movies!

Yours,
Michael Moore
MMFlint@aol.com
MichaelMoore.com



P.S. No, I'm not receiving any money from anybody to write this post.
P.P.S. I plead the fifth as to whether or not I paid any money to get into the movie theater tonight.

Friday, August 28, 2009

Dutch Cargo Bike!


Meet Franny, my Dutch cargo bike. Yes, that's me after riding it home from the grocery store, with two full bags of groceries on the front rack, along with my messenger bag, which generally holds my lunch bag and other stuff... Also, I *do* normally wear a helmet while riding, which you can see resting on the rear rack -- I took it off for the photo!

Why a big and heavy Dutch Bike? It's not just about having a heavy bike so as to give the rider a Cadillac-type ride. These bikes are built to carry racks, bags, baskets and child seats, while remaining stable. They maintain generous clearances around your feet and have the structural integrity to support heavier loads. These bikes are built for everyday transport of both people and things. They're not built for racing (though there is a pretty amusing video from 1933 of folks racing these 50-plus-pound beasts around the streets of Bussum, near Amsterdam -- actually, what they're racing are called transportfietsen, or Transport Bikes, which were used by bakers and butchers to deliver their wares -- those were the delivery boys doing the racing!), but rather for everyday transportation, in style.

The previous owner tells me that it is a Franssen Panningen (a fact that I have been unable to confirm or deny via the interwebs). I bought it off Craigslist from a guy in L.A., who had it imported from The Netherlands a few years ago, but then discovered that it was too tall for him to ride safely with his daughter on the back. So, my friend agreed to put it in the back of his truck and deliver it to me on his next trip north to the Bay Area... and now it's mine! A mechanic (who used to work at Tip Top Bike Shop, near my house in north Oakland, and was previously an employee of the Dutch Bike Company in Florida) who inspected it tells me that it is actually an unbranded Azor Opafiets, based on the lugs and the welding. Azor is a well-respected Dutch bicycle manufacturer that is known for producing frames and complete bicycles of a very high quality. My frame is no exception, though I have had to slowly upgrade the components one by one to bring them up to the same standard...

When it first showed up at my house, it looked like this:



Stock, it came with a front hub drum brake, operated by a hand lever, and a rear coaster brake hub with an internal Sturmey-Archer 3-speed gearset (model 'AWC (II)'), operated by a gripshift on the handlebar. It also came with front and rear fenders, rear skirt/coat guards, a full-enclosure chain guard, plastic pedals, a nice black paint job, lots of chrome, a stock vinyl sprung seat, a front and rear incandescent-bulb lighting system operated by a bell dynamo running on the front tire, and a really nice Dutch bell.

One of the first things I did was to remove the bell dynamo (Named for its shape, that's a type of dynamo, or electric generator, that operates by friction by rotating against your front or rear tire) and incandescent lighting system. I replaced it with a system of lights that runs off a hub-based dynamo generator (which still includes a drum brake, but is frictionless, operating instead using magnets), and turns itself off and on based on the ambient lighting level, but that I can also switch on or off manually if I want to. I did it using these components:

- a Sturmey-Archer X-FDD Generator/Brake Hub:



- a switched Busch and Müller Lumotec Oval Senso Plus headlight with standlight and sensor:



- a Busch and Müller 4D Lite Plus fender mount taillight, with a metal bar to protect the plastic lens in case of a rear end collision, and a Standlight:



Next, in order to make it into a proper cargo bike, I added a five-rail Cetma rack with custom handlebar mounts and struts, made in Eugene, Oregon:



This rack can carry a LOT. I've carried C on it, and she weighs like... uh... as much as a human being... I've also carried home four 15-pound bags of compost for the garden, no problems. Here's a photo of me bringing home a TREE on the rack (along with my bag, which probably also had a 6-pack of beer in it):



I also wanted a comfier seat for my ride, given the generally poor condition of roads in the Bay Area. I chose a classic choice to match the classic style of the bicycle -- a Brooks B.135 double-sprung saddle with a two-wire frame, which looked like this when it was new:



However, I recently performed a procedure on it to make it "Butchered and Tied," resulting in it looking like this:

What has happened is to bring the middle of the seat down and away from constant contact with the sensitive groin area of the rider. This, on a Brooks Saddle, also loosens the seat, making for a much more comfortable ride on both counts.

Another modification that I've made is to the coat guard, which previously had basically a friction fit onto the fender. I drilled a hole in the front and in the back, on each side, through the coat guard and the fender, and threaded a small piece of steel wire through the hole to hold the coat guard in place as the bicycle goes over the major bumps that I encounter constantly when cycling in the Bay Area. The modification looks like this:

I just twist up the end of the wire like a twist-tie, so that if I ever need to remove the coat guard, I can just untwist the wire and unthread it to facilitate the removal. (Or, cut the wire.)

Next, I'd like to add a Sturmey-Archer X-RD8 internal 8-speed rear hub with drum brake, to give me an easier time getting this nearly-50-pound bicycle up hills. While I'll miss the coaster brake, I'm sure I'll eventually get used to it, and having a drum brake on both the front and the rear should give the bike amazing stopping power. This modification will also require the addition of a new front crankset, because the X-RD8 has as its lowest gear a direct drive ratio, while my current 3-speed Sturmey-Archer rear hub actually has a 33% reduction for its lower gear. The result is that, while I can get away with a 46-tooth cog on the front today, after the upgrade I will need more like a 28-to-34-tooth cog in order to get the big beasty up the hills. The choice of 28 or 34 teeth depends on whether I can successfully find a set of 74mm Bolt-Center-Diameter [BCD] cranks, or whether I'm limited to the chainring that can be bolted directly to 110mm BCD cranks. Here's what I'm talking about, for you folks who, like me a week ago, just got lost by that previous sentence:

As you can see, the smaller BCD size allows for a smaller chainring, which in turn has fewer teeth. If I'm limited by the chainring that will fit onto the larger BCD-sized cranks, it necessarily has a larger diameter, meaning more teeth.  In fact, I probably just need that very same adapter pictured in the above photo, if only I can find it...

I will keep you posted as the process evolves, right here on this blog. Until then, happy cycling!

cheers,
~Garlynn

Thursday, August 27, 2009

Little Buddy cleans the floors while we slack...



I'm beginning to finally feel like I may be living in the 21st century.

Why?

Well... it's not the flying car.

But, a robot just cleaned my kitchen floor for the third time this afternoon (the first two times were this past weekend), and, I must say, I'm very impressed.

It's not just the labor-saving function. Sure, neither C nor I enjoy cleaning the floors very much. Especially not mopping. But, we do enjoy a clean floor.

And our little buddy, the robot floor-cleaner, cleans better than either one of us could. He's got a special process that he uses.

First, we fill him with 2 ounces of vinegar, diluted with enough warm water to finish filling up his clean water tank (about 4 cups of water plus the 2 ounces of vinegar).

Then, with his battery charged, we set him loose. Generally, it's a good idea for us to leave the room, and take any chairs or other obstacles with us, so he can clean under them. This past weekend, we worked in the garden; this afternoon, C was working from home, and I was at work in Berkeley.

While we're gone/out of the room, he moves around the floor, avoiding obstacles, and eventually cleaning all of it. His process is simple.

First, he sweeps big chunks off the floor and vacuums them up.

Then, he sprays some cleaning solution.

Then, he brushes the wetted floor, and at the same time, sucks up the moisture, which is deposited into his dirty fluid tank.

Finally, he air-dries the floor.

All of this happens continuously, and he remains in constant motion.

I must say, when he's done... well, the kitchen floor has honestly never been that clean before. Not even when C's mom was here that one time!! (I may get in trouble for saying that, though...)

Little Buddy is officially known as an iRobot Scooba, from U.S. Robotics Corporation, but that's kind of a mouthful....